E-Vane Wind Speed Sensor

Description

Manufacturer's warranty has expired.
SENSOR TYPE
3-Cup rotor
Reed switch/magnet provide 1 pulse per rotation.
OUTPUT for D2 Rotor
(Shown in photo)
1 pulse per rotation
2.5 mph per Hz
OUTPUT for Maximum Rotor
(Sold on products prior to ~May 2005)
1 pulse per rotation
3.4 mph per Hz
ROTOR DIAMETER
approx. 5 in (~125 mm)
SPEED RANGE
approx. 3 mph to 125+ mph (~5 kph to over 200 kph)
MOUNTING BRACKET
Supplied with an aluminum mounting bracket with 2 holes for screws.
Designed to be mounted on top of a pole or bracket.
Custom brackets available up request (offset, for example)
WIRE
Standard length is 25 feet (8m)
custom lengths available upon request - tested OK to over 1,500 feet
The wire is provided stripped and unterminated
2 small wire nuts provided to connect to the display once installed
DISPLAY
None provided with the sensor only
Formula for converting pulses to speed: 2.5 mph per Hz (2.5 mph per pulse/second)
POWER
No power required
Payment
We accept Paypal as payment. We will deliver according to your Paypal address, so please make sure your address is correct.
For specific requirements, please feel free to contact us.
Contact us
If you have any questions or comments, please send us a message through eBay.
Shipping
All the items will be sent out to your PayPal Address within 1-3 business days after receiving your cleared payment.
We do not ship on weekends.
Feedback
Feedback is important to all of us participating on the eBay community. We are always working hard for maintain high standards of excellence and strive for 100% customer satisfaction. So your POSITIVE FEEDBACK is very important.
If you have any question about the product when you receive it.  Please feel free to contact us first. We will reply you as soon as possible.