GDS-63 Dual Blower Motor Replacement for Napoleon GDS50 / GS50

Description

GDS-63 Dual Blower Motor Replacement for Napoleon GDS50 / GS50
GDS-63 Dual Blower Motor Replacement for Napoleon GDS50 / GS50
Aftermarket GDS-63 dual cage blower motor assembly replacement for the Napolon GDS50 / GS50 Havelock™ gas stoves.  Does not include replacement gasket.  This listing is for the blower only.  100% ball bearing, quiet and 180+ CFM of air flow.  Equal if not better quality than the OEM blower.  Blower will be shipped with two motor wires (male terminals) and one grounding wire with ring amp ring terminal.
How to Replace Blower on Napoleon GDS50 / GS50
Turn off the electrical power and the gas supply to the appliance.
Open the lower louvre control door, the two side doors and the fire viewing door. Remove the logs.
Remove the relief door assembly held on with 6 screws. Discard the gasket.
Disconnect the two blower wires. Remove the blower bracket held on with 4 screws.
Replace the blower using the existing bracket. When connecting the replacement blower, tighten the screws without distorting the rubber grommets. Replace the bracket / blower assembly in the appliance.
Reconnect the two wires. Hold the replacement gasket in place and reattach the relief door assembly. Replace the logs. Close all doors.
Turn the gas supply and electricity back on.
Because the blower is thermally activated, when turned on, it will automatically start approximately 15 - 30 minutes after lighting the appliance and will run for approximately 30 - 45 minutes after the appliance has been turned off. Use of the fan increases the output of heat.
Benefits of Adding a Fireplace Blower
Improves fireplace efficiency by as much as 80%
Helps reduce costly energy bills
Heats large rooms effectively
Installs quickly and easily
Affordable and efficient
Read More
Included With Purchase
OEM quality ball bearing blower motor
Thermal safety switch on motor
Impedance protected
1 year manufacturer's warranty
Product Details
Specifications
Dimensions
L x W x H
12.80" x 4.5" x 4.25"
Blower, Motor & Bearing
Type
AC Shaded Pole
Rotation
CW
Blade Type
High temp composite
Housing Material
Black powder coated steel
Bearing Type
Ball
Outboard Bearing Type
N/A
Bearing Lubrication
High Temp
Motor Insulation
Class H (rated to 392°F)
Motor RPM
3000 (2400 with load)
Air Flow
CFM
180
Installation
Mounting Type
Integrated bracket, side mounts
Electrical
Volts
115
Motor Frequency
60 Hz
Watts
184
Amperage
1.6
Power Cord
Yes
Power Cord Length
3 ft
Power Cord Type
Designed for 3-prong grounded
Accessories
Rheostat Variable Speed Controller
Not included
Thermostat
Not included
Thermostat Type
N/A
Thermostat Temperature
N/A
Other
Packaging Materials
Shipping box, bubble wrap, foam
Compatibility
Napoleon
GDS50 Havelock™
Documents
Installation Instructions
On Request
Listing and template services provided by inkFrog